Liquefaction Resistance of Soils: Summary Report from the 1996 NCEER and 1998 NCEER/NSF Workshops on Evaluation of Liquefaction Resistance of Soils
Top Cited Papers
- 1 October 2001
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 127 (10) , 817-833
- https://doi.org/10.1061/(asce)1090-0241(2001)127:10(817)
Abstract
Following disastrous earthquakes in Alaska and in Niigata, Japan in 1964, Professors H. B. Seed and I. M. Idriss developed and published a methodology termed the “simplified procedure” for evaluating liquefaction resistance of soils. This procedure has become a standard of practice throughout North America and much of the world. The methodology which is largely empirical, has evolved over years, primarily through summary papers by H. B. Seed and his colleagues. No general review or update of the procedure has occurred, however, since 1985, the time of the last major paper by Professor Seed and a report from a National Research Council workshop on liquefaction of soils. In 1996 a workshop sponsored by the National Center for Earthquake Engineering Research (NCEER) was convened by Professors T. L. Youd and I. M. Idriss with 20 experts to review developments over the previous 10 years. The purpose was to gain consensus on updates and augmentations to the simplified procedure. The following topics were reviewed and recommendations developed: (1) criteria based on standard penetration tests; (2) criteria based on cone penetration tests; (3) criteria based on shear-wave velocity measurements; (4) use of the Becker penetration test for gravelly soil; (4) magnitude scaling factors; (5) correction factors for overburden pressures and sloping ground; and (6) input values for earthquake magnitude and peak acceleration. Probabilistic and seismic energy analyses were reviewed but no recommendations were formulated.Keywords
This publication has 23 references indexed in Scilit:
- Evaluating cyclic liquefaction potential using the cone penetration testCanadian Geotechnical Journal, 1998
- Assessment of Liquefaction Potential during Earthquakes by Arias IntensityJournal of Geotechnical and Geoenvironmental Engineering, 1997
- Interpretation of cone penetration results in multilayered soilsInternational Journal for Numerical and Analytical Methods in Geomechanics, 1994
- Becker and standard penetration tests (BPT–SPT) correlations with consideration of casing frictionCanadian Geotechnical Journal, 1994
- Seismic cone penetration test for evaluating liquefaction potential under cyclic loadingCanadian Geotechnical Journal, 1992
- Correlation Between Liquefaction Resistance and Shear Wave VelocitySoils and Foundations, 1990
- Soil classification using the cone penetration testCanadian Geotechnical Journal, 1990
- Engineering seismology: Part IEarthquake Engineering & Structural Dynamics, 1988
- Engineering seismology: Part IIEarthquake Engineering & Structural Dynamics, 1988
- Standard penetration test procedures and the effects in sands of overburden pressure, relative density, particle size, ageing and overconsolidationGéotechnique, 1986