NO2 Sensor which uses immobilized nitrite oxidizing bacteria
- 1 June 1983
- journal article
- research article
- Published by Wiley in Biotechnology & Bioengineering
- Vol. 25 (6) , 1641-1651
- https://doi.org/10.1002/bit.260250616
Abstract
A biosensor consisting of immobilized nitrite oxidizing bacteria and an oxygen electrode has been developed for the amperometric determination of NO2 (nitrogen dioxide) gas. The response time for the determination of NO2 was within 3 min. A linear relationship was observed between the current decrease and the NO2 concentration below 255 ppm. The minimum concentration for the determination of NO2 was 0.51 ppm. The current decrease was reproducible within ±4% of the relative error. The selectivity of the microbial sensor for NO2 was satisfactory. The current output of the sensor was almost constant for more than 24 days and 400 assays.This publication has 10 references indexed in Scilit:
- Amperometric determination of ammonia gas with immobilized nitrifying bacteriaAnalytical Chemistry, 1981
- Microbial sensor system which usesMethylomonas sp. for the determination of methaneApplied Microbiology and Biotechnology, 1981
- Preliminary screening of mutagens with a microbial sensorAnalytical Chemistry, 1981
- Membrane biochemical indicator of Nox exposureJournal of Membrane Science, 1979
- Thin-film semiconductor NOxsensorIEEE Transactions on Electron Devices, 1979
- Microbioassay of nystatin with a yeast electrodeAnalytica Chimica Acta, 1979
- Amperometric determination of acetic acid with immobilized Trichosporon brassicaeAnalytica Chimica Acta, 1979
- Amperometric estimation of BOD by using living immobilized yeastsApplied Microbiology and Biotechnology, 1979
- Microbial electrode BOD sensorsBiotechnology & Bioengineering, 1977
- Kinetics and Mechanisms of the Gas-Phase Reaction of Water Vapor and Nitrogen DioxideIndustrial & Engineering Chemistry Fundamentals, 1974