Impact reliability of solder joints

Publisher Website
Google Scholar
Abstract
Owing to the impact reliability concern of portable devices, the impact toughness of solder joints was evaluated quantitatively by means of a miniature Charpy test, in which the shear rate was approximately 1 m/s. Four different solder balls (eutectic SnPb, near eutectic SnAgCu, eutectic SnZn and SnZnBi) were bonded to Cu or immersion Au/electroless Ni-P pads, and subsequently some of the samples were aged at 150/spl deg/C for up to 1000 h. Among the four solders, the SnZnBi on the Au/Ni-P showed the highest impact toughness independent of aging time. Interestingly, the SnZnBi on the Cu showed a significant loss of the toughness with aging time. We compared this miniature Charpy impact test with a conventional shear test, in which a solder bump was pushed off of its bond-pad at a shear rate of 200 /spl mu/m/s. These two tests are similar in terms of applying shear stress to a bump, but the shear rate of the impact test is three orders of magnitude higher than that of the shear test. Their results were quite different: the impact test revealed the ductile-to-brittle transitions in the joints.