Aging Behavior of Yttria Stabilized Zirconia (YSZ) in Non Aqueous Suspensions for Electrophoretic Deposition Application
- 1 June 2009
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 412, 279-285
- https://doi.org/10.4028/www.scientific.net/kem.412.279
Abstract
In this research aging behaviors of yttria stabilized zirconia (YSZ) in non aqueous suspensions, namely ethanol, isopropanol, n-propanol, acetylacetone and the mixture of ethanol-acetylacetone were investigated. For this purpose, electrical conductivity, electrophoretic mobility and suspension stability during aging time (6 to 7 days) were evaluated. Except for the ethanol-acetyl acetone mixture, each suspension contained 0 to 0.8 g/L iodine. It was revealed that, the alcoholic suspensions indicated lower conductivity in comparison with acetylacetone suspensions. However, acetylacetone suspension showed lower conductivity variation with time. Although iodine could improve the electrophoretic mobility of ethanol and acetylacetone suspensions, it had little effect on electrophoretic mobility of isopropanol and n-propanol suspensions. Also, it was indicated that iodine as a dispersant was not helpful for alcoholic suspensions stability. It was concluded that the mixture of acetylacetone-ethanol suspension was the best candidate in this study for electrophoretic deposition of YSZ, owing to its little behavior variation with the aging time, low conductivity and high electrophoretic mobility. High quality crack-free layers were electrophoretically deposited from this suspension on the substrate by applying 50 V/cm electrical field.Keywords
This publication has 9 references indexed in Scilit:
- A review on fundamentals and applications of electrophoretic deposition (EPD)Progress in Materials Science, 2007
- Ketone-amine based suspensions for electrophoretic deposition of Al2O3 and ZrO2Journal of the European Ceramic Society, 2006
- Electrophoretic deposition of YSZ electrolyte coatings for solid oxide fuel cellsSurface and Coatings Technology, 2006
- Electrophoretic deposition of YSZ powders for solid oxide fuel cellsJournal of Materials Science, 2004
- Electrophoretic deposition of electrolyte materials for solid oxide fuel cellsJournal of Materials Science, 2004
- Preparation of yttria-stabilized zirconia (YSZ) films on La0.85Sr0.15MnO3 (LSM) and LSM–YSZ substrates using an electrophoretic deposition (EPD) processJournal of the European Ceramic Society, 2001
- Fabrication of Dense Zirconia Electrolyte Films for Tubular Solid Oxide Fuel Cells by Electrophoretic DepositionJournal of the American Ceramic Society, 2001
- Theory of Cast Formation in Electrophoretic DepositionJournal of the American Ceramic Society, 1999
- Electrophoretic Deposition of Y2O3‐Stabilized ZrO2 Electrolyte Films in Solid Oxide Fuel CellsJournal of the American Ceramic Society, 1996