Behavior of Sustained High-Current Arcs on Molten Alloy Electrodes during Vacuum Consumable Arc Remelting

Publisher Website
Google Scholar
Abstract
Vacuum consumable arc remelting is a casting process carried out in a vacuum with the aim of remelting the consumable electrode in such a way that the new ingot has improved chemical and physical homogeneity. The power which causes the melting is supplied by a vacuum arc burning between the electrodes. In order to determine the furnace partitions of electrical power and current, experiments were conducted on molten-faced round electrodes. The quasi-steady melt rate was determined for both horizontally opposed 15-cm-diameter Ni electrodes and for vertically suspended 40-cm-diameter Inconel 718 electrodes. The cathode thermal power is directly proportional to the melt rate which, for the horizontally opposed electrode experiment, agrees to within 10 percent with the Ni breaker switch calorimetry measurements and with predictions from retarded potential analyzer plasma data. However, for the vertically suspended electrode experiments, the measured thermal power at the cathode is 50 percent higher than for nickel. When CO is introduced into the vertical alloy electrode system and electrode gap is increased, the cathode thermal power is reduced by approximately 50 percent. Furthermore, the electrode position measurements and observation of the ingot surface suggest that a concentrated arc is formed under these conditions.