Critical Interfaces in Organic Solar Cells and Their Influence on the Open-Circuit Voltage

Top Cited Papers
Publisher Website
Google Scholar
Abstract
Organic photovoltaics, which convert sunlight into electricity with thin films of organic semiconductors, have been the subject of active research over the past 20 years. The global energy challenge has greatly increased interest in this technology in recent years. Low-temperature processing of organic small molecules from the vapor phase or of polymers from solution can confer organic semiconductors with a critical advantage over inorganic photovoltaic materials since the high-temperature processing requirements of the latter limit the range of substrates on which they can be deposited. Unfortunately, despite significant advances, the power conversion efficiency of organic solar cells remains low, with maximum values in the range of 6%. A better understanding of the physical processes that determine the efficiency of organic photovoltaic cells is crucial to enhancing their competitiveness with other thin-film technologies. Maximum values for the photocurrent can be estimated from the light-harvesting capability of the individual molecules or polymers in the device. However, a better understanding of the materials-level processes, particularly those in layer-to-layer interfaces, that determine the open-circuit voltage (VOC) in organic solar cells is critical and remains the subject of active research. The conventional wisdom is to use organic semiconductors with smaller band gaps to harvest a larger portion of the solar spectrum. This method is not always an effective prescription for increasing efficiency: it ignores the fact that the value of VOC is generally decreased in devices employing materials with smaller band gaps, as is the case with inorganic semiconductors. In this Account, we discuss the influence of the different interfaces formed in organic multilayer photovoltaic devices on the value of VOC; we use pentacene−C60 solar cells as a model. In particular, we use top and bottom electrodes with different work function values, finding that VOC is nearly invariant. In contrast, studies on devices incorporating hole-transport layers with different ionization potentials confirm that the value of VOC depends largely on the relative energy levels of the donor and acceptor species that form the essential heterojunction. An analysis of the properties of solar cells using equivalent-circuit methods reveals that VOC is proportional to the logarithm of the ratio of the photocurrent density Jph divided by the reverse saturation current density J0. Hence, an understanding of the physical origin of J0 directly yields information on what limits VOC. We assign the physical origin of J0 to the thermal excitation of carriers from the donor to the acceptor materials that form the organic heterojunction. Finally, we show that the solution to achieving higher power conversion efficiency in organic solar cells will be to control simultaneously the energetics and the electronic coupling between the donor and acceptor materials, in both the ground and excited state.