A New Composite Sorbent for Methane-Nitrogen Separation by Adsorption
- 1 June 1990
- journal article
- research article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 25 (7) , 845-868
- https://doi.org/10.1080/01496399008050370
Abstract
Composite sorbents were prepared by depositing molybdenum dioxide on Super A activated carbon. The adsorption isotherms of CH4 and N2 were measured. The adsorption capacities and BET surface areas of these adsorbents decreased with an increase in the amount of MoO2; however, the equilibrium selectivity ratio (CH4/N2) increased significantly. Therefore, an optimum quantity of MoO2 should be used to produce a sorbent with high adsorption capacity and selectivity ratio (CH4/N2). An adsorbent containing 18.2 wt% MoO2 was found to be optimum which showed a CH4/N2 selectivity ratio of 4.25. The selectivity ratio decreased with pressure, and leveled off to about 3 at 12 atm. The separation of a CH4/N2 (50/50) mixture by pressure swing adsorption (PSA) was studied by using an equilibrium model. A new PSA cycle is described by which pipeline quality methane (>90% CH4 purity) could be produced using the composite sorbent at a recovery of 73% and a throughput of 200 L STP/h/kg.Keywords
This publication has 0 references indexed in Scilit: