Comparing Electrochemical Impedance Spectroscopy Methods for Estimating the Degree of Delamination of Organic Coatings on Steel
Open Access
- 1 June 1992
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 139 (6) , 1556-1560
- https://doi.org/10.1149/1.2069454
Abstract
Electrochemical impedance spectroscopy (EIS) was used to evaluate the degree of delamination of the epoxy primer Uniprime ED‐41 electrocoated on phosphate‐treated cold‐rolled steel in 3.5% exposed to air. Specimens with coating thicknesses of 20.3 and 20.8 μm and surface areas of 78.5 cm2 were used. Coating parameters were obtained using a circuit‐analog model. The area of delamination was estimated using several EIS parameters, including the pore resistance and the break point frequency. These values were compared to the corroded area determined visually. All methods considered exhibited a strong correlation over some or all of the range of exposure times.Keywords
This publication has 0 references indexed in Scilit: