Frequency and power limitations of Class-D transistor amplifiers

Abstract

The transition and saturation loss mechanisms of the two basic tuned Class-D amplifiers are studied in detail, as functions of drive waveform, signal frequency, and type of transistor. The charge control approach is used to derive optimum drive waveforms, together with approximate expressions for the various contributions to transition time that are verified experimentally. It is found that for high-frequency operation, the current-switching system using simple epitaxial transistors provides the highest output power with least likelihood of transistor failure, although with a somewhat lower efficiency than the voltage-switch. The voltage-switching system is found to be preferable when simple epitaxial transistors are not used. An example is given of a current-switching amplifier designed to deliver a continuous power of 1 kW at 500 kHz with an overall system efficiency of greater than 90 percent into a variable load.

Keywords

This publication has 7 references indexed in Scilit:

Some new aspects of thermal instability of the current distribution in power transistors
IEEE Transactions on Electron Devices, 1966
On solid-state class-D systems
Proceedings of the IEEE, 1965
Amplitude modulation of the switched-mode tuned power amplifier
Proceedings of the IEEE, 1965
Rise and fall time calculations of junction transistors
IEEE Transactions on Electron Devices, 1964
Switched-mode transistor amplifiers
IEEE Transactions on Communication and Electronics, 1963
Charge control analysis of transistor storage time dependence on input "On" pulse width
IEEE Transactions on Electron Devices, 1963
A STUDY OF CLASS C APPLICATIONS OF POWER TRANSISTORS AT HIGH AND VERY HIGH FREQUENCIES
Published by Defense Technical Information Center (DTIC) ,1963