Xanthan degragation by biofilm in porous media

Publisher Website
Google Scholar
Abstract
Biological activity in oil reservoirs can cause significant problems such as souring and plugging. This study focuses on the problem of polymer degradation and permeability reduction due to biofilm formation during polymer injection for improved oil recovery. Polymers are included in injection fluids to increase their viscosity. Results relating biological processes and polymer degradation to fluid‐dynamic conditions in a laboratory model porous medium are presented. A transparent flow cell with an etched two‐dimensional network of pores served as a model porous medium. A sterile xanthan polymer and natural sea water solution were continuously injected into the porous medium. A bacterial culture capable of xanthan degradation was introduced into the cell by a single injection. Some of the cells from this culture attached to the pore walls forming an immobile bacterial culture, termed biofilm. The development of this biofilm, its xanthan degradation and its effect on permeability were measured. The effects of injection rate and rate transitions were analyzed. Injection fluid viscosity was reduced by 30% after 5 min flow through the porous medium at the maximum steady state degradation rate observed. Permeability was significantly reduced by the xanthan degrading biofilm, causing an increase in pressure drop through the porous medium of up to 80%. Polymer injection in oil reservoirs may, therefore, have negative effects on oil recovery, unless efficient biofouling control is applied. The methodology presented may serve as a tool in the development of biofouling control measures in porous media.