The Lattice Design and Tolerance Analysis of the CBA Transport Line
- 1 August 1983
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 30 (4) , 2463-2465
- https://doi.org/10.1109/tns.1983.4332848
Abstract
The beam transport line from the AGS to CBA is 600 m long and consists of 70 bending magnets and 20 quadrupoles, as well as several special injection components. The beam has to bend 117 horizontally and drop 1.8 m in elevation. To insure that it has momentum acceptance of ΔP/P = ±1% and the transverse emittance dilution is within 30%, a detailed tolerance analysis has been carried out on the requirements of the AGS beam properties, magnetic field quality oL the transport magnets, and misalignment errors. Field quality tolerances of ΔBo/B < 1 × 10-3 for bending field, ΔG/G < 5 × 10-3 for gradient field and ΔB2/B < 2.5 × 10-4 cm-2 of the sextupole components in the bending magnets are indicated.Keywords
This publication has 2 references indexed in Scilit:
- Bending Magnets for the CBA Beam Transport LineIEEE Transactions on Nuclear Science, 1983
- Beam Transfer from the AGS to ISABELLEIEEE Transactions on Nuclear Science, 1979