Assessment study of superconducting fault-current limiters operating at 77 K
- 1 July 1993
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 8 (3) , 1138-1147
- https://doi.org/10.1109/61.252638
Abstract
The possible impact of nitrogen-cooled superconductors on the design and cost of superconducting fault current limiters is assessed by considering the technical specifications which such devices must meet, and by comparing material properties of 77 K and 4 K superconductors. The main advantage of operating superconductors at 77 K is that the refrigeration operating cost is reduced by a factor of up to 25, and the refrigeration capital cost is reduced by a factor of up to 10. The heat capacity at 77 K is several orders of magnitude larger than at 4 K. This phenomenon increases conductor stability against flux jumps but makes switching from the superconducting to normal state slow and difficult. Consequently, a high critical current density, probably at least 10/sup 5/ A/cm/sup 2/, is required.Keywords
This publication has 7 references indexed in Scilit:
- The utility requirements for a distribution fault current limiterIEEE Transactions on Power Delivery, 1992
- Field test results for a multi-shot 12.47 kV fault current limiterIEEE Transactions on Power Delivery, 1991
- Towards the superconducting fault current limiterIEEE Transactions on Power Delivery, 1991
- Current-limiting reactor based on high-T/sub c/ superconductorsIEEE Transactions on Magnetics, 1991
- A Current Limiting Device Using Superconducting D.C. Bias Applications and ProspectsIEEE Transactions on Power Apparatus and Systems, 1982
- A superconducting fault-current limiterJournal of Applied Physics, 1978
- Magnetization of Hard SuperconductorsPhysical Review Letters, 1962