In vitro and in vivo biological responses of plasma‐sprayed hydroxyapatite coatings with posthydrothermal treatment
- 5 April 2007
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 83A (2) , 263-271
- https://doi.org/10.1002/jbm.a.31246
Abstract
This study was undertaken to evaluate the effect of post-hydrothermal treatment on the biological responses of the plasma-sprayed hydroxyapatite (HA)-coated Ti-6Al-4V implant system both in vitro and in vivo. After hydrothermal treatment, the HA coating (HAC) shows the high mechanical strength and indices-of-crystallinity, denser microstructure, lower concentrations of amorphous and impurity phases, when compared with the as-sprayed HAC. The in vitro cell-culture studies, using UMR106 osteoblast-like cell, demonstrated no signifiacnt cell growth on both surface of as-sprayed and hydrothermal-treated HACs during 10-day culture. The in vivo studies, using the transcortical implant model in the femora of goats, evaluated the histological responses of two coatings. After 6 week of implantation, using backscattered electron images, no substantial histological variations in the extents of new bone apposition and new bone healing between the two HACs were observed. However, the as-sprayed HAC, owing to the dissolution induced the granular particles dissociated from the HAC, showed the statically lower extent of new bone apposition than hydrothermal-treated HAC at 12 weeks. The results suggest that hydrothermal treatment could be used to improve the mechanical strength, crystallinity, and phase composition of HAC, which are important factors of long-term fixation and stability of implant. Besides, the treated HAC could also achieve the initial fixation of implant in clinical use. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res 2007Keywords
This publication has 30 references indexed in Scilit:
- A Comparison of the Microstructural Feature and Bonding Strength of Plasma-Sprayed Hydroxyapatite Coatings with Hydrothermal and Vacuum Post-Heat TreatmentMATERIALS TRANSACTIONS, 2005
- Effect of Hydrothermal Treatment on Microstructural Feature and Bonding Strength of Plasma-Sprayed Hydroxyapatite on Ti-6Al-4VMATERIALS TRANSACTIONS, 2004
- Polyethylene wear, osteolysis and acetabular loosening with an HA-coated hip prosthesisThe Journal of Bone and Joint Surgery. British volume, 1999
- Changes in phases and crystallinity of plasma‐sprayed hydroxyapatite coatings under heat treatment: A quantitative studyJournal of Biomedical Materials Research, 1995
- Underlying mechanisms at the bone–biomaterial interface.Journal of Cellular Biochemistry, 1994
- Histomorphometry of hydroxyapatite coated and uncoated porous titanium bone implantsBiomaterials, 1994
- In vivo tensile testing of fluorapatite and hydroxylapatite plasma‐sprayed coatingsJournal of Biomedical Materials Research, 1994
- Post-deposition heat treatments for ion beam sputter deposited calcium phosphate coatingsBiomaterials, 1994
- Bonding Behavior of Three Types of Hydroxyapatite with Different Sintering Temperatures Implanted in BonePublished by Wolters Kluwer Health ,1988
- Development of a new system for evaluating the biocompatibility of implant materials using an osteogenic cell line (MC3T3‐E1)Journal of Biomedical Materials Research, 1988