A surface micromachined electrostatic ultrasonic air transducer
- 1 January 1994
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1241-1244 vol.2
- https://doi.org/10.1109/ultsym.1994.401810
Abstract
We describe a technique to fabricate an electrostatic transducer using silicon surface micromachining. Using these techniques to fabricate arrays of transducers with small electrode spacing, we make efficient and broadband ultrasonic air transducers. These transducers are made using standard silicon processing techniques allowing them to be integrated, in the future, with control electronics for the fabrication of electronically scanned systems with large transducer arrays. The air transducer described in this paper operates at 1.9 MHz with an insertion loss of 26 dB (slightly worse than a reference piezoelectric transducer) and a 20% bandwidth (-4 times better than the piezoelectric transducer). The impulse response of the transducer has a short ringdown time due to the fact that the transducer has a single resonance. We present here the theory of operation, the fabrication technique used, and the characterization of the deviceKeywords
This publication has 5 references indexed in Scilit:
- Capacitance devices for the controlled generation of ultrasonic fields in liquidsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Diagnostic measurements in capacitive transducersUltrasonics, 1993
- The performance of capacitive ultrasonic transducers using v-grooved backplatesMeasurement Science and Technology, 1991
- Optical probing of the mechanical impulse response of a transducerApplied Physics Letters, 1986
- Silicon as a mechanical materialProceedings of the IEEE, 1982