Electronic effects of sodium in epitaxial CuIn1−xGaxSe2
- 15 November 1997
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 82 (10) , 4982-4985
- https://doi.org/10.1063/1.366365
Abstract
Temperature dependent Hall effect measurements were made on Na-contaminated and uncontaminated epitaxial p-type CuIn1−xGaxSe2 films. Na was introduced by diffusion into as-deposited samples using both NaOH and Na2Se as sources. Na concentrations were measured using secondary ion mass spectroscopy by comparison to an implanted standard. Films contaminated with Na from either source were found to have much lower compensating donor densities than as-deposited films. Oxygen and other impurities were not found to be necessary to produce this effect although some changes with Se content were observed. These were independent of the Na effect.This publication has 7 references indexed in Scilit:
- Gallium diffusion and diffusivity in CuInSe2 epitaxial layersApplied Physics Letters, 1996
- Relation between electrical properties and composition in CuInSe2 single crystalsSolar Cells, 1990
- Structural and electrical properties of CuInSe2 epitaxial layers prepared by single-source evaporationThin Solid Films, 1980
- Structural and electrical properties of CuIn0.7Ga0.3Se2 epitaxial layers on GaAs substratesCrystal Research and Technology, 1980
- Electrical Properties of p- and n-Type CuInSe2Single CrystalsJapanese Journal of Applied Physics, 1979
- Epitaxial layers of CuInSe2 on GaAsThin Solid Films, 1978
- Structural and electrical properties of CuGaSe2 thin films on GaAs substratesCrystal Research and Technology, 1978