Influence of Clods on the Hydraulic Conductivity of Compacted Clay
- 1 August 1990
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical Engineering
- Vol. 116 (8) , 1231-1248
- https://doi.org/10.1061/(asce)0733-9410(1990)116:8(1231)
Abstract
The hydraulic conductivity of a highly plastic, compacted clay soil is significantly influenced by the size of clods used in preparing the soil for compaction. For soil compacted dry of optimum, hydraulic conductivity is 1,000,000 times smaller when the soil is prepared from small (4.6‐mm) rather than large (19‐mm) clods. For soil compacted wet of optimum, clod size is unimportant. Large differences are seen in the hydraulic conductivity of soils compacted with standard versus modified Proctor procedures. The conclusion reached is that the fate of clods and interclod pores during soil processing and compaction controlled the hydraulic conductivity of the compacted soil. To achieve low hydraulic conductivity, it is necessary to destroy the clods and to eliminate large interclod pores either by wetting the soil to a high water content or using a large compactive effort.Keywords
This publication has 8 references indexed in Scilit:
- Interaction of Earthen Liner Materials with Industrial Waste LeachateHazardous Waste and Hazardous Materials, 1988
- Permeation of Compacted Clay with Organic ChemicalsJournal of Geotechnical Engineering, 1986
- Hydraulic Conductivity of Two Prototype Clay LinersJournal of Geotechnical Engineering, 1985
- Hydraulic Conductivity Tests on Compacted ClayJournal of Geotechnical Engineering, 1985
- Predicting Hydraulic Conductivity of Clay LinersJournal of Geotechnical Engineering, 1984
- Measurement of the Hydraulic Conductivity of Fine-Grained SoilsPublished by ASTM International ,1981
- Permeability of Compacted ClayJournal of the Soil Mechanics and Foundations Division, 1965
- HYDRAULIC FLOW THROUGH SATURATED CLAYSPublished by Elsevier ,1962