Abstract
By conducting continuous weight-gain measurements from 500 to 1300 C on a variety of Fe-Al, Fe-Cr-Al, Ni-Al and Co-Al alloys in oxygen at 100 torr and examining the reaction products which form, reasons for the enexpected ineffectiveness of preferential aluminum oxidation have been explored. With Fe-4.4 percent Al and Fe-12 percent Al, there are two different regions of parabolic growth- these are associated with the appearance of γ-A12O3 below 900 C and α-Al2O3 above. The latter is normally more protective but possesses a greater tendency for cracking and spalling; adding 24.6 percent chromium promotes its formation at lower temperatures. With Ni-5.0 percent Al, two displaced regions are also found; here, nickel penetrates alumina to provide intermediate NiO · Al2O3 and an outer layer of NiO. With Co-4 percent Al, somewhat less cobalt penetrates γ-Al2O3 to provide CoQ · Al2O3 and an outer layer of Co3O4. When both CoO and α-Al2O3 are stable phases, the latter grows mainly by internal oxidation and offers little protection.