RADIATION DOSES DURING CT FLUOROSCOPY

Publisher Website
Google Scholar
Abstract
CT fluoroscopy (CTF) is a relatively new imaging modality that is particularly useful for performing complex biopsy procedures. Despite the obvious benefits, the potential exists to deliver considerable radiation doses to both the patients and medical staff. The purpose of our study was to quantify the radiation levels based upon typical clinical procedures. To assess the potential radiation risks, the patient radiation doses via the CT dose index (CTDI) method were measured during CTF for a GE Pro-Speed CT scanner using standardized head and body phantoms and a CT ionization chamber. The measurements were performed for a variety of kVp, mA, and slice thickness settings. To determine patient radiation doses, the CT kVp, mA, and total CTF scan times were recorded for various biopsy procedures. To determine the radiation doses to the hands of the radiologists, a radiation survey meter was used to measure the scattered radiation from standard phantoms. The effectiveness of various types of leaded gloves and shields were also determined. The measured CTDI values ranged from 20.4 cGy min −1 to 63.1 cGy min −1 of CTF. For a group of 78 patients, the clinically utilized imaging times varied from 13.0 to 407 s with an mean time of 96.6 s ± 78.9 s (1 standard deviation). The scattered x-ray radiation at the position of the radiologists hands performing the biopsy procedures was measured to be 0.6 to 1.5 mGy min −1. The thin leaded gloves provided a relatively minimal reduction in the scattered radiation to the hands between 11% and 44% dependent upon the kVp and the type of glove. However, floor mounted radiation shields reduced the scattered radiation levels to the body by 94% to 99%. In comparison to standard x-ray fluoroscopy, CTF employs much higher radiation dose rates due to the higher kVp, mA, and rotating geometry. It is important to minimize the radiation dose to patients and staff by limiting the imaging times, employing lower mA settings, and using appropriate radiation protection measures.