Studies on Epoxy Resin Film Coating by the Flame Spraying Method
- 1 January 1964
- journal article
- research article
- Published by Taylor & Francis in Transactions of the IMF
- Vol. 41 (1) , 57-58
- https://doi.org/10.1080/00202967.1964.11869885
Abstract
The authors have shown that special formulations are required to give complete covering of steel surface (with no swelling, break away, cracks, etc) with flame sprayed film coating of epoxy resin. For this purpose, there should be minimum stress in the film, and it was concluded that treatments effective for this purpose involve adding adequate filler to reduce the thermal expansion coefficient, controlling the degree of cure, holding small closed pores in the film and semi-curing immediately after spray to keep the required tensile strength.Keywords
This publication has 0 references indexed in Scilit: