Abstract
New experiments of Molenaar and Aarts, Blewitt and others seem to confirm the view of the author, previously based only on the experiments of Gyulai and Hartly and Stepanow on sodium chloride, that vacant lattice sites, and possibly interstitial atoms, are generated during plastic flow in ductile crystals, particularly in metals. It is pointed out that the average temperatures near a moving dislocation are probably not sufficiently high to evaporate vacant lattice sites or interstitial atoms as a result of thermal effects alone. Instead, one apparently must conclude that the imperfections are generated either by purely geometrical means during the looping of dislocations about appropriate obstacles, as the result of dynamical instability in the motion of a dislocation, possibly near a jog, or in the very high thermal pulses or ‘spikes’ which are generated either in the zone where two dislocations of opposite sign annihilate one another or near impediments where dislocations are strongly curved. It is pointed out that a pair of vacancies is probably stable near room temperature and may diffuse more rapidly than a single vacancy. It is also proposed that vacancies retained during quenching of Al-Cu alloys and those generated by cold-work play an important role in the precipitation process. The origin of work hardening in single crystals is discussed and several alternative interpretations, which involve the impediment of Frank-Read generators either directly or indirectly as a consequence of the generation of vacancies, are presented. The importance of prismatic dislocations formed by condensation of vacancies is restated. The role that vacancies formed by cold-work may play in determining the stored energy and decrease in density and in affecting processes such as creep and the hardening of latent slip planes is also discussed. Finally a few experiments are proposed, typical of those which could prove decisive in isolating the influence of vacancies.

This publication has 32 references indexed in Scilit: