Kinetics of Thermal Decomposition of Epoxy Resin in Nitrogen-Oxygen Atmosphere
- 1 October 1997
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 123 (10) , 1041-1046
- https://doi.org/10.1061/(asce)0733-9372(1997)123:10(1041)
Abstract
The kinetics of thermal decomposition of epoxy resin are investigated under various heating rates (2, 5, 10, and 20 K/min) and oxygen concentrations (5, 10, and 20%) in the nitrogen-oxygen atmosphere by means of thermogravimetric measurements. Results show that, unlike only one stage of reaction in the inert atmosphere, two reaction stages are involved when oxygen is present in the carrier gas. The initial reaction temperature, in the range of 470–572 K, decreases with increasing oxygen concentration and decreasing heating rate. The rate equations for various oxygen concentrations can be modeled by Arrhenius-type equations, from which kinetic parameters such as activation energy, preexponential factor, and reaction orders for unreacted material and oxygen concentration are determined using Friedman's method. The activation energy is 129.6–151.9 kJ/mol for the first reaction and 103–117.8 kJ/mol for the second reaction, and decreases with increasing oxygen concentration. The cut-off conversion factor betwe...Keywords
This publication has 15 references indexed in Scilit:
- Pyrolysis kinetics of epoxy resin in a nitrogen atmosphereJournal of Hazardous Materials, 1996
- Pyrolysis Kinetics of Scrap Tire Rubbers. I: Using DTG and TGAJournal of Environmental Engineering, 1995
- Pyrolysis of Polyethylene in a Fluidized Bed ReactorEnergy & Fuels, 1994
- Simulation of Steady-State Heat and Mass Transfer in a Rotary Kiln IncineratorHazardous Waste and Hazardous Materials, 1993
- Pyrolysis mechanisms of natural rubber deduced from the dependence of product yields on sample sizeEuropean Polymer Journal, 1992
- Research Areas for Improved Incineration System PerformanceJAPCA, 1988
- On the Occurrence of Transient Puffs in a Rotary Kiln Incinerator Simulator I. Prototype Solid Plastic WastesJAPCA, 1987
- Incinerability of Hazardous WastesHazardous Waste and Hazardous Materials, 1986
- Thermal degradation of poly(ethylene terephthalate): A kinetic analysis of thermogravimetric dataJournal of Applied Polymer Science, 1983
- Kinetics of thermal degradation of char‐forming plastics from thermogravimetry. Application to a phenolic plasticJournal of Polymer Science Part C: Polymer Symposia, 1964