Rapidly degraded terpolymers of DL‐lactide, glycolide, and ϵ‐caprolactone with increased hydrophilicity by copolymerization with polyethers
- 1 October 1990
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research
- Vol. 24 (10) , 1397-1411
- https://doi.org/10.1002/jbm.820241011
Abstract
A series of 66 terpolymers of dl‐lactide, glycolide, and ϵ‐caprolactone was synthesized for the purpose of identifying those materials which exhibited rapid degradation in vitro. Polymers having half‐lives from a few weeks to several months were identified. The morphology of each material was scanning calorimetry. A terpolymeric composition of 60% glycolide, 30% dl‐lactide, and 10% ϵ‐caprolactone, which exhibited a half‐life of 17 days, was selected for further investigation. The hydrophilicity of this material was increased by performing the polymerization in the presence of a polyether prepolymer, Pluronic F‐68, with the motivation of concomitantly reducing cell and tissue adhesion. An increase in the hydrophilicty of the material was apparent from contact angle measurements. Copolymerization with the prepolymer also resulted in a stronger and partly crystalline material which was mechanically stable at physiological temperature in water. A slight increase was observed in the half‐life of the polymer relative to the base polymer due to the presence of the prepolymer.This publication has 14 references indexed in Scilit:
- THE COLORIMETRIC DETERMINATION OF LACTIC ACID IN BIOLOGICAL MATERIALPublished by Elsevier ,2021
- Bioabsorption of polylactides with different molecular propertiesJournal of Biomedical Materials Research, 1989
- Protein‐resistant surfaces prepared by PEO‐containing block copolymer surfactantsJournal of Biomedical Materials Research, 1989
- In vitro chemical degradation of poly(glycolic acid) pellets and fibersJournal of Applied Polymer Science, 1987
- γ-Radiation effects on chemical degradation of polycaprolactonePolymer Engineering & Science, 1985
- Biodegradable polymers for use in surgery — poly(glycolic)/poly(Iactic acid) homo and copolymers: 2. In vitro degradationPolymer, 1981
- Contact angles at the solid—water interfaceJournal of Colloid and Interface Science, 1979
- Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1Polymer, 1979
- Degradation rates of oral resorbable implants (polylactates and polyglycolates): Rate modification with changes in PLA/PGA copolymer ratiosJournal of Biomedical Materials Research, 1977
- Some factors affecting the solubility of polymersJournal of Chemical Technology & Biotechnology, 1953