Resonant load control methods for industrial servo drives

7 November 2002

conference paper
Published by Institute of Electrical and Electronics Engineers (IEEE)

Vol. 3 (01972618) , 1438-1445
https://doi.org/10.1109/ias.2000.882073

Abstract

High-performance servo drives are often limited by mechanical load resonance. In this paper, seven methods of resonant-load control are compared for their ability to improve performance in the presence of a low-frequency (100 Hz) lightly damped resonance. The seven methods are: notch filter, bi-quad filter, rigid body observers, low-pass filter, observer filtering, active resonance damping and center-of-mass control. Several of the methods are based on filtering the command signal; the remaining methods are based on signals acquired from an observer. Development of these methods is presented; each method is applied to a physical system and evaluated for effects on command response and dynamic stiffness.

Keywords

This publication has 8 references indexed in Scilit:

Notch filter tuning for resonant frequency reduction in dual inertia systems
Published by Institute of Electrical and Electronics Engineers (IEEE) ,2003
Comparison of motion control loops for industrial applications
Published by Institute of Electrical and Electronics Engineers (IEEE) ,2003
Vertical-vibration control of elevator using estimated car acceleration feedback compensation
IEEE Transactions on Industrial Electronics, 2000
Suppression of torsional oscillations in a high-performance speed servo drive
IEEE Transactions on Industrial Electronics, 1998
Analysis and compensation of speed drive systems with torsional loads
IEEE Transactions on Industry Applications, 1994
Motion control with induction motors
Proceedings of the IEEE, 1994
Design principles and implementation of acceleration feedback to improve performance of DC drives
IEEE Transactions on Industry Applications, 1992
Considerations for low-inertia AC drives in machine tool axis servo applications
IEEE Transactions on Industry Applications, 1991