The GEO600 project
- 1 June 1997
- journal article
- research article
- Published by IOP Publishing in Classical and Quantum Gravity
- Vol. 14 (6) , 1471-1476
- https://doi.org/10.1088/0264-9381/14/6/012
Abstract
GEO600, an interferometric gravitational-wave detector with an arm length of 600 m, is currently being built in northern Germany close to Hannover. GEO600 incorporates an externally modulated fourfold delay-line Michelson interferometer giving a round-trip optical length of 2400 m. A master - slave combination of a monolithic diode-pumped Nd:YAG ring laser and an injection-locked amplifier will give a light power of about 10 W at a wavelength of 1064 nm. Power recycling increases the light power inside the interferometer to a level of about 10 kW. The use of both power and signal recycling will yield a sensitivity of the same order of magnitude as the first stages of the other large-scale gravitational-wave detectors LIGO and VIRGO currently under construction. High signal recycling factors allow the sensitivity to be increased at a chosen frequency while reducing the bandwidth of the detector. This gives an advantage over broad-band detectors in detecting narrow-band periodic sources such as pulsars. The 25 cm diameter mirrors will be suspended as double pendulums from a platform supported by vibration-reduction systems. The passive filtering properties of this system sufficiently reduce the seismic noise in the frequency range of interest, i.e. 50 - 1000 Hz. The detector will start taking data in the year 2000.Keywords
This publication has 4 references indexed in Scilit:
- Modulation, signal, and quantum noise in interferometersPhysical Review A, 1991
- External modulation technique for sensitive interferometric detection of displacementsPhysics Letters A, 1990
- Recycling in laser-interferometric gravitational-wave detectorsPhysical Review D, 1988
- A Mode Selector to Suppress Fluctuations in Laser Beam GeometryOptica Acta: International Journal of Optics, 1981