Effects of thermal cycling in a reducing atmosphere on metal/polyimide interfaces
- 1 February 1994
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 9 (2) , 504-514
- https://doi.org/10.1557/jmr.1994.0504
Abstract
Effects of thermal cycling in a reducing (deuterium) atmosphere on the structure and chemistry of Cr/Cu/Cr/polyimide (PI)/Si and Au/Cu/Ti/polyimide (PI)/Si multilayer systems have been studied. In the Cr/PI system the interface between the Cr and PI was sharp and distinct in the as-deposited state, and after the anneal in the reducing atmosphere. Tensile cracks through the Cr/Cu/Cr layers were found after annealing and are the result of thermal stresses. No evidence for significant diffusion of Cr into the PI was found. In the Ti/PI system, the interface between the Ti and PI was sharp in the as-deposited state. After annealing in vacuum and in the reducing environment, regions of the interface between the Ti layer and the PI were converted to an oxide, Ti5O9. Annealing in the deuterium environment also caused delamination of the Ti film from the PI and blistering of the metal in the sample interior. No significant diffusion of the Ti into the PI was detected. In both systems, the metal in contact with the PI acted as a barrier to the diffusion of Cu into the PI.Keywords
This publication has 7 references indexed in Scilit:
- Complex formation and growth at the Cr– and Cu–polyimide interfaceJournal of Vacuum Science & Technology A, 1988
- Temperature-dependent x-ray photoemission studies of metastable Co/polyimide interface formationJournal of Vacuum Science & Technology A, 1988
- Ion bombardment and titanium film growth on polyimideJournal of Vacuum Science & Technology A, 1988
- The microstructure of metal–polyimide interfacesJournal of Vacuum Science & Technology A, 1988
- Metal polyimide interface: A titanium reaction mechanismJournal of Vacuum Science & Technology A, 1986
- PolyimidesPublished by Springer Nature ,1984
- Mechanics of Composite MaterialsJournal of Applied Mechanics, 1975