Sequestration of Iron in Groundwater by Polyphosphates
- 1 October 1988
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 114 (5) , 1192-1199
- https://doi.org/10.1061/(asce)0733-9372(1988)114:5(1192)
Abstract
For small communities, iron removal from groundwater by conventional methods is sometimes cost prohibitive. An experimental investigation was conducted to determine the effectiveness of sequestering this iron by polyphosphate addition while providing the necessary disinfection through chlorine addition. Iron sequestration by polyphosphate was found favorable to no iron treatment. The presence of calcium in the groundwater models inhibited treatment effectiveness. The polyphosphate sequestrant should be added to the groundwater before the addition of chlorine but simultaneous addition was nearly as successful. The commercial polyphosphates analyzed were not found to depolymerize significantly at 18 °C during typical drinking water supply storage time periods. Treatment was found to be better with the polyphosphate product containing a higher percentage of polyphosphate relative to total phosphorous. Ultrafiltration results suggest that much if not all the sequestered iron is in a colloidal or polymeric form.Keywords
This publication has 4 references indexed in Scilit:
- Silicate as Fe, Mn Deposition Preventative in Distribution SystemsJournal AWWA, 1972
- Use of Sodium Hexametaphosphate in Manganese StabilizationJournal AWWA, 1960
- Prevention of the Settlement of IronJournal AWWA, 1950
- Reversion of Molecularly Dehydrated Sodium PhosphatesIndustrial & Engineering Chemistry, 1950