LIBRA–A light ion beam inertial confinement fusion reactor conceptual design
- 1 May 1989
- journal article
- research article
- Published by Hindawi Limited in Laser and Particle Beams
- Vol. 7 (4) , 721-731
- https://doi.org/10.1017/s0263034600006194
Abstract
The LIBRA light ion beam fusion commerical reactor study is a self-consistent conceptual design of a 330 MWe power plant with an accompanying economic analysis. Fusion targets are imploded by 4 MJ shaped pulses of 30 MeV Li ions at a rate of 3 Hz. The target gain is 80, leading to a yield of 320 MJ. The high intensity part of the ion pulse is delivered by 16 diodes through 16 separate z-pinch plasma channels formed in lOO torr of helium with trace amounts of lithium. The blanket is an array of porous flexible silicon carbide tubes with Li17Pb83 flowing downward through them. These tubes (INPORT units) shield the target chamber wall from both neutron damage and the shock overpressure of the target explosion. The target chamber is a right circular cylinder, 8·7 meters in diameter. The target chamber is ‘self-pumped’ by the target explosion generated overpressure into a surge tank partially filled with liquid that surrounds the target chamber. This scheme refreshes the chamber at the desired 3 Hz frequency without excessive pumping demands. The blanket multiplication is 1·2 and the tritium breeding ratio is 1·4. The direct capital cost of LIBRA is estimated to be $2200/kWe.Keywords
This publication has 6 references indexed in Scilit:
- Radioactively induced sublimation in solid tritiumPhysical Review Letters, 1988
- Targets for Heavy-Ion FusionFusion Technology, 1988
- Proposal of Power Plant by Light Ion Beam FusionFusion Technology, 1987
- Near spherical illumination of ion-beam and laser targetsPhysics Letters A, 1986
- Tritium Recovery from Liquid Lithium-Lead by Vacuum DegassingNuclear Technology - Fusion, 1983
- HIBALL—A conceptual design study of a heavy-ion driven inertial confinement fusion power plantNuclear Engineering and Design, 1982