Quasi-2D analysis of the effect of passivant on the performance of long-wavelength infrared HgCdTe photodiodes
- 1 September 1996
- journal article
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 11 (9) , 1302-1309
- https://doi.org/10.1088/0268-1242/11/9/010
Abstract
The results of a quasi-two-dimensional model for calculating passivant-induced surface leakage currents due to band-to-band tunnelling in mercury cadmium telluride (MCT) photovoltaic (PV) diodes are presented. The object is to assess the effect of a fixed surface state charge density due to a passivant on the zero-bias resistance - area product for the technologically important case when surface state charges accumulate the MCT surface. Calculations are carried out to estimate the tolerable value of beyond which the of the MCT diode degrades. To the best of our knowledge, this is the first time that such a detailed calculation involving the acceptor concentration profile near the surface has been reported for long-wavelength IR (LWIR) MCT photodiodes. This calculation has been done numerically, and hence the depletion width (pinched near the surface), the electric field and the band-to-band tunnelling are calculated as a function of depth, layer by layer, from the passivant - semiconductor interface. The currents - diffusion, generation - recombination, band-to-band and trap-assisted tunnelling - have been calculated in each layer, and the zero-bias resistance - area product is determined for each mechanism. Hence, the resultant is calculated. The results are compared with the earlier step model of Bhan and Gopal (Semicond. Sci. Technol. 9 (1994) 289), which assumed a surface layer of constant concentration . The present model indicates that for photodiodes with a cut-off wavelength of and an acceptor concentration , operating at 77 K, a would degrade significantly. This value is insensitive to composition (in the LWIR). For an diode, the tolerable value of is found to depend on the concentration in the layer. Further, the tolerable value of for an diode is much higher than for an diode, for donor concentrations .Keywords
This publication has 12 references indexed in Scilit:
- Numerical simulation of HgCdTe detector characteristicsJournal of Electronic Materials, 1995
- Analysis of surface leakage currents due to Zener tunnelling in HgCdTe photovoltaic diodesSemiconductor Science and Technology, 1994
- Thermal effects in Hg-diffused long-wave infrared HgCdTe photodiodesJournal of Applied Physics, 1992
- Ion implantation and diffusion for electrical junction formation in HgCdTePublished by SPIE-Intl Soc Optical Eng ,1991
- Dark current processes in thinned p-type HgCdTeJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 1991
- Passivation with II–VI compoundsJournal of Vacuum Science & Technology A, 1990
- Passivation of mercury cadmium telluride surfacesJournal of Vacuum Science & Technology A, 1989
- Intrinsic infrared detectorsProgress in Quantum Electronics, 1988
- Calculation of intrinsic carrier concentration in Hg1−xCdxTeJournal of Applied Physics, 1983
- Energy gap versus alloy composition and temperature in Hg1−xCdxTeJournal of Applied Physics, 1982