The temperature and strain-rate dependence of the shear strength of mild steel
- 1 January 1970
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 21 (169) , 63-82
- https://doi.org/10.1080/14786437008238397
Abstract
An account is given of experiments in which the shear flow stress of mild steel was measured at temperatures from 195 to 713°K and strain rates from 10−3 to 4 × 104 sec−1. The experimental results obtained at room temperatures are compared with those of earlier tension tests. The rate sensitivity of the flow stress, (∂τ/∂ In γ) T , is found to be a decreasing function of temperature, except at the highest strain rates; at these rates a large increase in the rate sensitivity is observed, the flow stress at constant temperature varying approximately linearly with strain rate. The data are interpreted in terms of thermal activation rate theory and the theory of the damping of dislocation motion by phonon viscosity.Keywords
This publication has 15 references indexed in Scilit:
- Testing of Materials at Medium rates of StrainJournal of Mechanical Engineering Science, 1967
- Dislocation damping in zinc single crystalsBritish Journal of Applied Physics, 1967
- Dislocation Damping in Aluminum at High Strain RatesJournal of Applied Physics, 1967
- A CRITICAL REVIEW OF THE PEIERLS MECHANISMCanadian Journal of Physics, 1967
- Comparison of the Thermal Conductivity, Electrical Resistivity, and Seebeck Coefficient of a High-Purity Iron and an Armco Iron to 1000°CJournal of Applied Physics, 1966
- Dislocation dynamicsExperimental Mechanics, 1965
- Low-temperature deformation of body-centred cubic metals. II. Mechanism of thermally activated flowProceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 1964
- Dislocation Multipoles and Their Role in Strain-HardeningJournal of Applied Physics, 1964
- The yield behaviour of mild steel in dynamic compressionProceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 1956
- An Investigation of the Mechanical Properties of Materials at very High Rates of LoadingProceedings of the Physical Society. Section B, 1949