Cu(InGa)Se/sub 2/ thin-film solar cells with continuously evaporated Cd-free buffer layers
- 1 January 1996
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 793-796
- https://doi.org/10.1109/pvsc.1996.564247
Abstract
In/sub x/Se/sub y/ (IS) and ZnIn/sub x/Se/sub y/ (ZIS) were prepared as the buffer layer for Cu(InGa)Se/sub 2/ (CIGS) thin-film solar cells without the use of Cd. These buffer layers can be sequentially deposited on a CIGS thin-film absorber layer in the same fabrication apparatus. The performance of the CIGS thin-film solar cells with these buffer layers was affected by annealing both before and after deposition of a ZnO window layer. Annealing in air at 200/spl deg/C for 1 hour before the deposition of ZnO resulted in relatively stable and high efficiencies of over 12%. The solar cell with a high fill factor of over 0.75 was obtained using a coevaporated ZIS buffer layer. An efficiency of 13.0% was achieved using a coevaporated IS buffer layer without using a chemical bath deposition method.Keywords
This publication has 1 reference indexed in Scilit:
- Textured ZnO Thin Films for Solar Cells Grown by Metalorganic Chemical Vapor DepositionJapanese Journal of Applied Physics, 1991