Preparation of c-axis oriented PbTiO3 thin films and their crystallographic, dielectric, and pyroelectric properties
- 1 July 1986
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 60 (1) , 361-367
- https://doi.org/10.1063/1.337654
Abstract
Highly c‐axis oriented and epitaxial PbTiO3 thin films were grown on MgO single crystals and epitaxial Pt film substrates by the rf‐magnetron sputtering method. The films with a 98% c‐axis orientation rate were obtained under low deposition rate (3 thin film was studied by high‐temperature x‐ray diffraction. It was found that the c‐axis of the tetragonal phase was parallel to the substrate just below Tc and the c‐axis becomes perpendicular to the substrate with lowering of temperature. These films show high resistivity (∼1010/Ω cm). It was found that significant pyroelectric currents are detected on all specimens without poling treatment. The polarization directions of the films are the same in all specimens. One of these films had a low relative dielectric constant of 97 and a high pyroelectric coefficient of 2.5×10−8 C/cm2 K without poling treatment. These films will be suitable for applications such as pyroelectric infrared detector and piezoelectric transducer.This publication has 6 references indexed in Scilit:
- Preparation and basic properties of PbTiO3ferroelectric thin films and their device applicationsFerroelectrics, 1985
- Pyroelectric materials, their properties and applicationsPhysica Status Solidi (a), 1982
- Solid-state pyroelectric infrared image converterInfrared Physics, 1979
- Electromechanical Properties of PbTiO3 Ceramics Containing La and MnThe Journal of the Acoustical Society of America, 1971
- The growth and ferroelectric properties of high resistivity single crystals of lead titanateMaterials Research Bulletin, 1970
- X-ray and neutron diffraction study of ferroelectric PbTiO2Acta Crystallographica, 1956