Analysis of the Stability of Some Norwegian Natural Clay Slopes
- 1 March 1957
- journal article
- Published by Thomas Telford Ltd. in Géotechnique
- Vol. 7 (1) , 1-16
- https://doi.org/10.1680/geot.1957.7.1.1
Abstract
Synopsis The Paper deals with the problem of calculating the stability of natural clay slopes, and the discussion is concentrated on which values of the shear strength of the clay should be used in the stability analysis. Based on a determination of the undrained shear strength of the clay, the stability can be calculated by the ϕ = 0 analysis. If the shear strength of the clay, however, is known in terms of effective stresses, the stability calculation may be carried out by a so-called analysis. The results of stability calculations based on the two methods are given both for a number of stable slopes, and also for slopes on which slides have occurred. In general it may be said that, in the described cases, the long-term stability of natural slopes in normally consolidated clay based on the θ = 0 analysis gives too small values of the safety factor. The c′θ′ analysis gives values of the safety factor which seems to be reliable. Le traité Porte sur le probéme du calcul de la stabilité des talus naturels d'argile, et le discussion se centre sur la question de savoir quelles valeurs de la résistance au cisaillement de largile adopter dans l'analyse de la stabilité. A base de la détermination de la resistance au cisaillement de l'argile non drainée, on peut en calculer la stabilité: par l'analyse dite θ = 0. Si, cependant, la résistance au cisaillement de l'argile est connue en termes d'efforts effectifs, le calcul de la stabilité peut être effectué par l'analyse dite c′θ′. Les r(ésultats de calcul de stabilité selon les deux médthodes sont donnés tant pour un nombre de talus ou il y a eu des éboulements. D'une façon générale on peut dire que, dans les cas décrits, la stabilité des talus naturels d'argiles normalement consolidées basée sur l'analyse θ = 0 donne des valeurs insuffisantes du coefficient de sécurité. L'analyse c′θ′ donne des valeurs d'un coefficient de sécrité qui semble de tout repos.Keywords
This publication has 0 references indexed in Scilit: