Permeability of Clays Under Organic Permeants
- 1 January 1989
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical Engineering
- Vol. 115 (1) , 115-131
- https://doi.org/10.1061/(asce)0733-9410(1989)115:1(115)
Abstract
A magnesium montmorilionite and a kaolinite clay are subjected to organic and inorganic permeants to study the changes in permeability caused by the reaction between clays and permeants. The permeants are acetic acid, aniline, methanol, and xylene. Tests are conducted in specially designed and constructed flexible wall permeameters that provide precise measurements of pressures and flows. Increases in clay permeability due to clay‐permeant chemical reactions are measured to be on the order of two to three times the original permeability. This is in contrast to the 100 to 1,000 times increases reported by others. The writers believe that the large increases reported by others is probably due to the use of fixed‐wall permeameters. The writers' results show that methanol doubles the permeability of montmorilionite. Acetic acid reacts with the carbonates in montmorilionite and liberated carbon dioxide. The resulting loss of mass triples the clay's permeability. Aniline and xylene will not flow through saturat...Keywords
This publication has 8 references indexed in Scilit:
- Hydraulic Conductivity of Compacted Clay to Dilute Organic ChemicalsJournal of Geotechnical Engineering, 1987
- Permeability Testing in the Triaxial CellGeotechnical Testing Journal, 1986
- The Effect of Organic Fluids on Hydraulic Conductivity of Compacted KaolinitePublished by ASTM International ,1985
- The Permeability of Clay to Acidic and Caustic PermeantsPublished by ASTM International ,1985
- Measurement of the Hydraulic Conductivity of Fine-Grained SoilsPublished by ASTM International ,1981
- Mechanisms Controlling the Permeability of ClaysClays and Clay Minerals, 1971
- HYDRAULIC FLOW THROUGH SATURATED CLAYSPublished by Elsevier ,1962
- The Permeability of Fine-Grained SoilsPublished by ASTM International ,1955