Short-segment Pedicle Instrumentation
- 1 February 1996
- journal article
- Published by Wolters Kluwer Health in Spine
- Vol. 21 (3) , 288-294
- https://doi.org/10.1097/00007632-199602010-00006
Abstract
This biomechanical study of fractures in cadaver vertebrae used specially designed pedicle screws to determine screw strains during loading of two different fixation constructs. The authors determined the relative benefit of adding offset sublaminar hooks to standard pedicle screw constructs to reduce screw bending moments and prevent fixation failure and sagittal collapse. Clinical studies have demonstrated a high incidence of early screw failure in short-segment pedicle instrumentation constructs used to treat unstable burst fractures. Strategies to prevent early construct failure include longer constructs, anterior strut graft reconstruction, and use of offset sublaminar hooks at the ends of standard short-segment pedicle instrumentation constructs. Human cadaver spines with an L1 burst fracture were instrumented with a standard short-segment pedicle instrumentation construct using specially instrumented pedicle screws. Mechanical testing was carried out in flexion, extension, side bending, and torsion, and stiffness and screw bending moments were recorded. Offset hooks were applied initially, then removed and testing repeated. Stiffness data were compared to intact and postfracture results, and between augmented and standard constructs. Addition of offset laminar hooks, supralaminar at T11 and infralaminar at L2, to standard short-segment pedicle instrumentation constructs increased stiffness in flexion by 268%, in extension by 223%, in side bending by 161%, and in torsion by 155% (all were significant except torsion). Sublaminar hooks also reduced pedicle screw bending moments to roughly 50% of standard in both flexion and extension (P < 0.05). Supplemental offset hooks significantly increase construct stiffness without sacrificing principles of short-segment pedicle instrumentation, and absorb some part of the construct strain, thereby reducing pedicle screw bending moments and the likelihood of postyield deformation and clinical failure.Keywords
This publication has 18 references indexed in Scilit:
- Thoracolumbar Burst FractureSpine, 1994
- Pathomechanical Analysis of Thoracolumbar Burst Fracture ReductionSpine, 1993
- Biomechanics of Indirect Reduction of Bone Retropulsed Into the Spinal Canal in Vertebral FractureSpine, 1993
- Early failure of short-segment pedicle instrumentation for thoracolumbar fractures. A preliminary report.Journal of Bone and Joint Surgery, 1993
- Unstable Thoracolumbar and Lumbar Burst Fractures Treated with the AO Fixateur InterneJournal of Spinal Disorders, 1992
- 1992 Volvo Award in Experimental Studies Vertebral Burst FracturesSpine, 1992
- Sagittal Index in Management of Thoracolumbar Burst FracturesSpine, 1990
- Biomechanical Analysis of Pedicle Screw Instrumentation Systems in a Corpectomy ModelSpine, 1989
- The Three Column Spine and Its Significance in the Classification of Acute Thoracolumbar Spinal InjuriesSpine, 1983
- A standard test for laboratory animal boneJournal of Biomechanics, 1971