An interstitial hyperthermia system at 27 MHz

Publisher Website
Google Scholar
Abstract
An interstitial hyperthermia system using thin, flexible wires operating at a frequency of 27 MHz has been evaluated for possible use in combination with (iridium) brachy-therapy applications employing flexible nylon afterloading catheters. This method of interstitial heating is argued to be a variation of local-current-field heating, however with the direct galvanic contact between electrode and tissue replaced by a capacitive coupling between wire and tissue. Through a special design of the wire the length of the heated area along the catheter can be chosen freely. Standard non-prepared implantation catheters can be used, so that no change from the established implantation techniques is required. Possible advantages of these 27 MHz wires over coaxial dipole antennas at higher frequencies are simplicity and low cost of the heating system, free choice of effective heating length for each wire and uniformity of heating along this effective heating length up to the tip of the wire. Flexibility of the wires is maintained, enabling application in curved (even U-shaped) catheters, e.g. for head and neck implantations. Impedance matching of the wires to the generator, necessary for an optimal transfer of power, appears possible by means of a variable air coil. Care should be taken to avoid stray capacitances of the connecting cables with respect to ground or among the different cables used. Measurements in muscle-equivalent split phantoms with infrared thermography have been performed with both single and multiple wires. The resulting SAR distributions confirm the working principle of these low-frequency wires (resistive heating) and illustrate the difference with radiative antennas at higher frequencies. The system is being applied both in experimental animal studies and in a clinical pilot study.