Electro-discharge machining of mesoscopic parts with electroplated copper and hot-pressed silver tungsten electrodes
- 23 December 1999
- journal article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 10 (1) , 1-6
- https://doi.org/10.1088/0960-1317/10/1/301
Abstract
Recent advances in the development of plasma etchers for silicon has brought machines to the market which are able to etch silicon with high etch rates (>5 µm min-1 ) at high anisotropy (taper of sidewalls 1 mm and microelectromechanical systems with feature sizes <100 µm. In this work micromachined silicon is used as a mold for electroplating copper and for hot-pressing silver tungsten. After removing the silicon, the copper or silver-tungsten is used as an electrode for electro-discharge machining. Using these process steps nearly any conductive material can be shaped, in particular magnetic materials like amorphous metal which are difficult or impossible to machine otherwise. The fabrication of the electrodes is described as well as the influence of the electrode material on the achieved quality of the final part.Keywords
This publication has 4 references indexed in Scilit:
- Polymeric MST - high precision at low costJournal of Micromechanics and Microengineering, 1997
- Behaviour of a silicon spring fabricated by wire electro-discharge machiningJournal of Micromechanics and Microengineering, 1993
- Design of sealed cavity microstructures formed by silicon wafer bondingJournal of Microelectromechanical Systems, 1993
- Macroscopic Plastic Properties of Dislocation-Free Germanium and Other Semiconductor Crystals. I. Yield BehaviorJournal of Applied Physics, 1963