The load on the lumbar spine during asymmetrical bi-manual materials handling

Publisher Website
Google Scholar
Abstract
Previous biomechanical analyses of typical load manipulation tasks were mainly limited to sagittal-plane activities or to static cases. This paper includes the biomechanical determination and assessment of lumbar load during asymmetrical bi-manual materials handling tasks which involve lateral turning of the body, trunk inclination, and sagittal flexion and lateral bending of the spine. Diagonal lifting tasks were analysed for different values for load weight (0-40 kg) and task duration (0·75-1·5 s). Whereas a constant grasp height of 15 cm was assumed, the height for releasing the load differed (50, 100, 150 cm). A dynamic spatial human model (‘The Dortmunder’) was used for calculating the torque in the sagittal, frontal, and transversal planes through the lumbosacral joint and for determining the compressive and the sagittal and lateral shear force at the L5-S1 disc. The trajectories of body segments and load are computer-simulated on the basis of postures adopted during the movement. During diagonal lifting of loads, lumbosacral torque in the sagittal plane is considerably larger than the lateral bending and torsional torque components. Dynamic analyses result in higher maximum values in the lumbar-load time curves than static analyses. The shorter the time for task execution, the higher the resultant dynamic effects and, in consequence, the higher the lumbar load. Lumbosacral compression and shear increase with increasing load-release heights due to higher acceleration and retardation of body and load when the same grasp position and task duration are assumed. The maximum load-bearing capacity of the lumbar spine was determined on the basis of strength data for isolated lumbar segments provided in the literature. The compressive strength falls within the same range as the compressive forces calculated for asymmetrical lifting of loads up to 40 kg. On account of the wide scattering of the compressive strength values, the main influences were determined (age and gender). At an age of 40 years, strength is approx. 6·7 kN for males and 4·7 kN for females (decrease with age per decade: 1·0 kN males, 0·6 kN females). In order to avoid overestimating an individual's lumbar compressive strength, predicted values should be reduced, e.g., by the standard deviation in the male or female samples (2·6 kN or 1·5 kN). Although only a few maximum shear force values are available in the literature, comparison with the calculated values for diagonal lifting leads to the conclusion that sagittal and lateral shear should not be ignored in the assessment of lumbar load during asymmetrical handling tasks.