A variable low frequency high voltage generator using valves with fibre optic light guide control

Publisher Website
Google Scholar
Abstract
Describes a new method of generating low frequency high alternating voltages by modulating two high voltage DC supplies of opposite polarity. The modulation is accomplished by the use of triode valves situated at high voltage whose grids are supplied by control signals, transmitted from the control circuit through fibre optic light guides. The first generator built is capable of driving a 1 nF load at 10 kV peak over the frequency range DC-50 Hz, or a 0.1 mu F capacitor at up to 0.1 Hz. In order to increase the voltage and current ratings of the generator, a series-parallel arrangement of valves may be used, with the appropriate control signals fed to the grid of each valve. Because the generator is relatively free from any electrical noise, it can be used to energize insulation samples in connection with partial discharge detection investigations.

This publication has 0 references indexed in Scilit: