The effect of agitation on the morphology and penicillin production ofPenicillium chrysogenum
- 25 April 1990
- journal article
- research article
- Published by Wiley in Biotechnology & Bioengineering
- Vol. 35 (10) , 1011-1023
- https://doi.org/10.1002/bit.260351009
Abstract
Penicillium chrysogenum strain P1 was grown on complex media in 10 and 100 L agitated fermenters at various aeration rates and stirrer speeds. Samples were removed at intervals for measurements of the culture morphology. At high stirrer speeds (1000 and 1200 rpm) in 10-L fermentations the rate of decrease in the mean effective hyphal length was faster and the rate of penicillin production was lower than fermentations done at 800 rpm. At similar power inputs per unit volume in 100-L fermentations, the change in mean effective hyphal length was less and higher penicillin production rates were observed. This work comparing the results at two scales has shown that neither of the concepts of impeller tip speed or the dissipation rate of turbulence have general validity as a measure of hyphal damage. Our results are reasonaby well correlated by groups similar to circulation rate (ND/V) with lower circulation rates being beneficial. An adaptation of the van Suijdam and Metz relationship, expressed as P/Dtc, was most successful. Our data are insufficient to demonstrate the generality of the relationship but do support the concept of a dispersion zone around the impellers in which mycelia may be damaged. The greater the frequency of circulation of mycelia through the zone the greater the damage and the lower the rate of penicillin synthesis by the culture.This publication has 15 references indexed in Scilit:
- The culture of plant cellsPublished by Springer Nature ,2005
- Effect of dissolved carbon dioxide on penicillin fermentations: Mycelial growth and penicillin productionBiotechnology & Bioengineering, 1986
- Turbulent flow in stirred tanks. Part I: Turbulent flow in the turbine impeller regionAIChE Journal, 1985
- Use of autoradiography to quantify aspects of fungal growth and starvation in submerged liquid cultureTransactions of the British Mycological Society, 1982
- Methods for quantitative representation of the morphology of moldsBiotechnology & Bioengineering, 1981
- Influence of engineering variables upon the morphology of filamentous moldsBiotechnology & Bioengineering, 1981
- Optimization of the production of progesterone 11?-hydroxylase byRhizopus nigricansBiotechnology & Bioengineering, 1980
- Inhibition of penicillin production by carbon dioxideJournal of Chemical Technology & Biotechnology, 1975
- Fermentation mixing scale‐up techniquesBiotechnology & Bioengineering, 1966
- A model system for evaluating shear in the design of stirred fermentorsBiotechnology & Bioengineering, 1966