Electrical coupling and impulse propagation in anatomically modeled ventricular tissue

Abstract
Computer simulations were used to study the role of resistive couplings on flat-wave action potential propagation through a thin sheet of ventricular tissue. Unlike simulations using continuous or periodic structures, this unique electrical model includes random size cells with random spaced longitudinal and lateral connections to simulate the physiologic structure of the tissue. The resolution of the electrical model is ten microns, thus providing a simulated view at the subcellular level. Flat-wave longitudinal propagation was evaluated with an electrical circuit of over 140,000 circuit elements, modeling a 0.25 mm by 5.0 mm sheet of tissue. An electrical circuit of over 84,000 circuit elements, modeling a 0.5 mm by 1.5 mm sheet was used to study flat-wave transverse propagation. Under normal cellular coupling conditions, at the macrostructure level, electrical conduction through the simulated sheets appeared continuous and directional differences in conduction velocity, action potential amplitude and Vmax were observed. However, at the subcellular level (10 microns) unequal action potential delays were measured at the longitudinal and lateral gap junctions and irregular wave-shapes were observed in the propagating signal. Furthermore, when the modeled tissue was homogeneously uncoupled at the gap junctions conduction velocities decreased as the action potential delay between modeled cells increased. The variability in the measured action potential was most significant in areas with fewer lateral gap junctions, i.e., lateral gap junctions between fibers were separated by a distance of 100 microns or more.

This publication has 22 references indexed in Scilit: