New theoretical model of stress transfer between fibre and matrix in a uniaxially fibre-reinforced composite

Abstract
A new analytical method has been developed that can predict the stress transfer between fibre and matrix in a uniaxially fibre-reinforced composite associated with either a single matrix crack or a fibre break. Account is taken of thermal residual stresses arising from a mismatch in thermal expansion coefficients between the fibre and matrix. In addition Poisson ratio mismatches are also taken into account. The theoretical approach retains all relevant stress and displacement components, and satisfies exactly the equilibrium equations, the interface conditions and other boundary conditions involving stresses. Two of the four stressstrain-temperature relations are satisfied exactly, whereas the remaining two are satisfied in an average sense. The required noninterface displacement boundary conditions are also satisfied in an average sense. The general representation is used to solve three types of stress transfer problem. A matrix crack and a broken fibre are analysed for the case when there is perfect bonding between fibre and matrix. The third type of problem takes account of frictional slip at the interface governed by the Coulomb friction law. The approximate analytic approach described in this paper, and the preliminary numerical predictions presented, indicate that the stress transfer between fibres and matrix in a unidirectional fibre-reinforced composite, loaded in tension, can now be investigated theoretically in more detail than before. The paper includes some discussion of singularities in the stress fields, which are smoothed by the averaging techniques employed in the analysis. The analytical approach has enabled the development of a micro-mechanical model of frictional slip at the fibre-matrix interface based on the Coulomb friction law, which is more realistic than assuming that the interracial shear stress is a constant. Predictions are presented of the stress distributions along the fibre-matrix interface and, in particular, it is shown how the length of the frictional slip zone is related to applied strain, friction coefficient, fibre volume fraction and the difference between the test and 'manufacturing' temperatures. An indication is given of many other areas of composite modelling where the new theory will be applied.

This publication has 16 references indexed in Scilit: