Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell
Top Cited Papers
- 5 November 2010
- journal article
- research article
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 132 (47) , 16883-16892
- https://doi.org/10.1021/ja106299g
Abstract
The spatial distribution of reaction products in multilayer polymer solar cells induced by water and oxygen atmospheres was mapped and used to elucidate the degradation patterns and failure mechanisms in an inverted polymer solar cell. The active material comprised a bulk heterojunction formed by poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) sandwiched between a layer of zinc oxide and a layer of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) that acted as, respectively, electron and hole transporting layers between the active material and the two electrodes indium−tin−oxide (ITO) and printed silver. X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) in conjunction with isotopic labeling using H218O and 18O2 enabled detailed information on where and to what extent uptake took place. A comparison was made between the use of a humid (oxygen-free) atmosphere and a dry oxygen atmosphere during testing of devices that were kept in the dark and devices that were subjected to illumination under simulated sunlight. It was found that the reactions taking place at the interface between the active layer and the PEDOT:PSS were the major cause of device failure in the case of these inverted devices, which are compatible with full roll-to-roll (R2R) coating and industrial manufacture. The PEDOT:PSS was found to phase separate, with the PEDOT-rich phase being responsible for most of the interface degradation in oxygen atmospheres. In water atmospheres, little chemically induced degradation was observed, whereas a large partially reversible dependence of the open circuit voltage on the relative humidity was observed. In addition, temporal aspects are discussed in regard to degradation mechanisms. Finally, analytical aspects in regard to storing devices are discussed.Keywords
This publication has 38 references indexed in Scilit:
- Mechanistic Insights into UV-Induced Electron Transfer from PCBM to Titanium Oxide in Inverted-Type Organic Thin Film Solar Cells Using AC Impedance SpectroscopyACS Applied Materials & Interfaces, 2010
- Nb-TiO2/polymer hybrid solar cells with photovoltaic response under inert atmosphere conditionsSolar Energy Materials and Solar Cells, 2010
- Influence of polymer–metal interface on the photovoltaic properties and long-term stability of nc-TiO2-P3HT hybrid solar cellsSolar Energy Materials and Solar Cells, 2010
- Relation between Photoactive Layer Thickness, 3D Morphology, and Device Performance in P3HT/PCBM Bulk-Heterojunction Solar CellsMacromolecules, 2009
- Influence of oxygen on semi-transparent organic solar cells with gas permeable electrodesOrganic Electronics, 2009
- Vertical Phase Separation in Poly(3‐hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar CellsAdvanced Functional Materials, 2009
- Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar CellsAdvanced Materials, 2009
- Organic tandem solar cells: A reviewEnergy & Environmental Science, 2009
- Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contactApplied Physics Letters, 2006
- Lifetimes of organic photovoltaics: photooxidative degradation of a model compoundSurface and Interface Analysis, 2006