The effect of temperature on the continuous ferrous-iron oxidation kinetics of a predominantlyLeptospirillum ferrooxidans culture
- 5 October 1999
- journal article
- research article
- Published by Wiley in Biotechnology & Bioengineering
Abstract
The ferrous-iron oxidation kinetics of a bacterial culture consisting predominantly of Leptospirillum ferrooxidans were studied in continuous-flow bioreactors. The bacterial culture was fed with a salts solution containing 12 g/L ferrous-iron, at dilution rates ranging from 0.01 to 0.06h, and temperatures ranging from 30 to 40°C, at a pH of 1.75. The growth rate, and the oxygen and ferrous-iron utilization rates of the bacteria, were monitored by means of off-gas analysis and redox-potential measurement. The degree-of-reduction balance was used to compare the theoretical and experimental values of r, −r and −r, and the correlation found to be good. The maximum bacterial yield on ferrous-iron and the maintenance coefficient on ferrous-iron, were determined using the Pirt equation. An increase in the temperature from 30 to 40°C did not appear to have an effect on either the maximum yield or maintenance coefficient on ferrous-iron. The average maximum bacterial yield and maintenance coefficient on ferrous-iron were found to be 0.0059 mmol C/mmol Fe2+ and 0.7970 mmol Fe2+/mmol C)/h, respectively. The maximum specific growth rate was found to be 0.077h. The maximum specific ferrous-iron utilization rate increased from 8.65 to 13.58 mmol Fe2+/mmol C/h across the range from 30 to 40°C, and could be described using the Arrhenius equation. The kinetic constant in bacterial ferrous-iron oxidation increased linearly with increasing temperature. The ferrous-iron kinetics could be accurately described in terms of the ferric/ferrous-iron ratio by means of a Michaelis–Menten-based model modified to account for the effect of temperature. A threshold ferrous-iron level, below which no further ferrous-iron utilization occurred, was found at a ferric/ferrous-iron ratio of about 2500. At an overall iron concentration of 12 g/L, this value corresponds to a threshold ferrous-iron concentration of 78.5 ×10−3 mM. © 1999 John Wiley & Sons, Inc. Biotechnol Bioeng 65: 44–53, 1999.Keywords
This publication has 11 references indexed in Scilit:
- Reasons why ‘Leptospirillum’-like species rather than Thiobacillus ferrooxidans are the dominant iron-oxidizing bacteria in many commercial processes for the biooxidation of pyrite and related oresMicrobiology, 1999
- Kinetics of Ferrous Iron Oxidation by Leptospirillum Bacteria in Continuous CulturesBiotechnology Progress, 1998
- Biological oxidation of ferrous sulphate by Thiobacillus ferrooxidans: a review on the kinetic aspectsBiochemical Engineering Journal, 1998
- A kinetic model for biological oxidation of ferrous iron byThiobacillus ferrooxidansBiotechnology & Bioengineering, 1997
- Recent Developments in Modeling the Kinetics of BioleachingPublished by Springer Nature ,1997
- Economic and environmental niches of biohydrometallurgyMinerals Engineering, 1996
- Physiological characteristics ofthiobacillus ferrooxidansandleptospirillum ferrooxidansand physicochemical factors influence microbial metal leachingGeomicrobiology Journal, 1992
- Growth of Thiobacillus ferrooxidans on ferrous iron in chemostat culture: Influence of product and substrate inhibitionJournal of Chemical Technology and Biotechnology, 1983
- Maintenance energy: a general model for energy-limited and energy-sufficient growthArchiv für Mikrobiologie, 1982
- THE THIOBACILLI,Microbiology and Molecular Biology Reviews, 1957