Microcrack closure in rocks under stress: Direct observation

Publisher Website
Google Scholar
Abstract
Microcrack closure in rocks under increasing stress was observed directly with a scanning electron microscope. Uniaxial stresses to 300 bars were applied with a small hydraulic press to specimens of Westerly (RI) granite, both unheated and previously heat cycled to 500°C, and of Frederick (MD) diabase, heat cycled to 700°C. Closure characteristics (rate, final closure pressure, etc.) depend on crack orientation, shape, surface roughness, and on the nature of fracture intersections and interactions. Cracks perpendicular to the applied stress closed while those parallel to the stress tended to open. Long, narrow cracks (low aspect ratio) closed at relatively low pressures. At some intersections, one fracture would open while another simultaneously closed, depending upon their orientations. Many fractures closed uniformly even though offset by other fractures. Local stress concentrations often caused new fracturing at low applied stress. Some fractures were propped open until material lodged inside was crushed. Significant irreversible damage occurred during the first stress cycle. Closure characteristics varied significantly among the samples. The unheated granite has cracks with rough, pitted, and mismatched walls. Only partial closure occurred under stress with many sections remaining open. Crack porosity is reduced but continues to be interconnected. Fractures in the preheated granite and diabase are also irregular, but the walls are well‐matched and closure is nearly complete. The cracks in the heated granite closed at lower stresses than in the diabase. As the maximum stress was approached for the heated granite, new transgranular cracks formed and preexisting cracks were enlarged. The variations in closure rate and character were also observed in strain measurements.

This publication has 37 references indexed in Scilit: