Pressure Buildup Equations for Spherical Flow Regime Problems

Publisher Website
Google Scholar
Abstract
Pressure buildup and flow tests conducted in wells that do not completely penetrate the producing formation or that produce from only a small portion of the total productive interval can generate noncylindrical flow regimes and require special interpretation procedures. Frequently a spherical flow regime is representative, and a new equation based on the continuous point-source solution to the diffusivity equation in spherical coordinates is presented for analyzing tests of this nature. The practical utility of the equation is demonstrated by practical utility of the equation is demonstrated by analyzing tests involving restricted producing intervals that cannot be treated with existing analytic methods.Practical guidelines for applying the proposed equation are developed by analyzing pressure data generated by a numerical simulator and more complex analytic solutions for variety of special completion situations. Equations for determining static reservoir pressure, formation permeability, and skin factors pressure, formation permeability, and skin factors are derived and their validity verified under theoretical test conditions. The equations presented should have a variety of applications, but are particularly suited for analyzing pressure data from particularly suited for analyzing pressure data from drillstem tests with short flow periods. Introduction: The fundamental equation for analyzing pressure buildup tests of oil wells was presented by Horner in 1951. This equation is based on the "line source" solution to the boundary value problem describing the pressure distribution resulting from the cylindrical flow of a slightly compressible fluid in an infinite reservoir. To achieve cylindrical flow the wellbore of a well must completely penetrate the producing formation. Although this restriction is often satisfied, in many tests it is not; for example, oil wells producing through perforated casing may have only a small portion of the total production interval perforated, or in the case of production interval perforated, or in the case of drillstem tests only a small interval (often 10 to 15 ft) of a thick (hundreds of feet) homogeneous formation may be selected for testing. Tests involving restricted producing intervals of this type have a characteristic buildup curve as described by Nisle and by Brons. These authors demonstrated that Horner's conventional equation could also be used for restricted producing interval problems, provided the correct portion of the buildup problems, provided the correct portion of the buildup curve is used. They showed that during a short period after starting production (or equivalently period after starting production (or equivalently after shut-in) the well behaves as if the total sand thickness were equal to the interval open to flow. That is, Horner's equations apply if the total sand thickness, h, is replaced by the producing interval thickness, h. They also showed that after a transition period the late part of the buildup curve could be used in the conventional manner to calculate formation permeability and static reservoir pressure. Kazemi and Seth extended the work of pressure. Kazemi and Seth extended the work of Nisle by including the effect of anisotropy; they also presented an equation, based on an analytic solution developed by Hantush, for estimating the shut-in time required for the development of the second straight-line portion in a conventional plot --i.e., p vs In (t + Deltat/Deltat. The first straight-line part o the buildup curve usually lasts only a few part o the buildup curve usually lasts only a few minutes and may often be obscured by afterflow, whereas the latter straight-line portion may take several hours to develop and may not even occur for practical shut-in times if the formation is thick and the producing time is relatively short. This paper demonstrates that the transition period paper demonstrates that the transition period between the two cylindrical flow periods can be analyzed with the spherical* flow equations presented here. In addition, practical guidelines presented here. In addition, practical guidelines cue developed for their application.Moran and Finklea first suggested that a pressure buildup equation based on spherical now pressure buildup equation based on spherical now was necessary to correctly analyze pressure data obtained from wireline formation testers. In many respects this study is similar; in fact, the basic pressure buildup equation (although it was derived pressure buildup equation (although it was derived from a different starting equation) presented here was used by Moran and Finklea in analyzing wireline formation test data.

This publication has 0 references indexed in Scilit: