Focused ion beam lithography
- 1 January 1991
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures
- Vol. 9 (1) , 173-175
- https://doi.org/10.1116/1.585282
Abstract
Focused ion beams of Be and Si were used to expose the following resists: PMMA, HEBR‐214, KTI 820, and Microposit 2400. The resist thickness remaining for various development times was measured. For example, the minimum dose of 200 keV Be ions needed to expose 6800 Å thick PMMA varied from 7×1012 to 2×1013 ions/cm2 depending on development time. HEBR was found to act as either a positive or negative resist depending on dose. Exposures were also carried out in resist whose thickness exceeded the ion range. The effective PMMA exposure ranges of 200 keV Be ions and 200 keV Si ions were found to be 1.2 and 0.45 μm, respectively.Keywords
This publication has 0 references indexed in Scilit: