Effects of Cu Powder, BaSO4and Cashew Dust on the Wear and Friction Characteristics of Automotive Brake Pads
- 1 January 1996
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 39 (2) , 346-353
- https://doi.org/10.1080/10402009608983537
Abstract
Brake pads used in automotive disk brakes are generally made of many components such as phenolic resin, aramid fiber, Cu powder, BaSO4, and cashew dust. Using a slider-on-disk-type wear tester, the friction and wear characteristics of the pad against the disk made of cast iron at high disk temperature (above 80°C) were studied with varying the content of the components. In particular, the relation between the sudden decrease in friction (fade) and the wear rate were closely studied. The experimental, result of the wear test was also analyzed, systematically by the multiple regression method and the effects of the components were clarified quantitatively.Keywords
This publication has 13 references indexed in Scilit:
- An Experimental Investigation of Frictionally-Excited Thermoelastic Instability in Automotive Disk Brakes Under a Drag Brake ApplicationJournal of Tribology, 1994
- The Wear of Aramid Fiber Reinforced Brake Pads: The Role of Aramid FibersTribology Transactions, 1994
- Automotive friction materials evolution during the past decadeWear, 1984
- High temperature wear of semimetallic disc brake padsWear, 1978
- Microstructural changes in semimetallic disc brake pads created by low temperature dynamometer testingWear, 1978
- Physical and chemical changes of organic disc pads in serviceWear, 1978
- High temperature wear of asbestos-reinforced friction materialsWear, 1976
- Chemical changes in asbestos-based friction materials during performance — a reviewWear, 1975
- Semi-Metallics: A New Type of Friction MaterialPublished by SAE International ,1971
- Wear equation for polymers sliding against metal surfacesWear, 1970