Epitaxial growth of Co-Cr films and their characterization
- 15 April 1985
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 57 (8) , 4003-4005
- https://doi.org/10.1063/1.334890
Abstract
In recent years, much attention has been devoted to the study of Co‐Cr thin films. There are mainly two different models of magnetization mechanisms which have been proposed in the literature, typified by the work of Iwasaki et al. and that of Wielinga et al. To further clarify this matter, epitaxial Co‐Cr films have been grown by rf sputtering onto (001) MgO single‐crystal substrates. The cleanliness of the substrate and target were found to be the most critical parameters. The substrate bias and too high a substrate heating temperature were also found to be unfavorable for epitaxial growth of Co‐Cr films. These epitaxial films were characterized by x‐ray diffraction, electron diffraction, Auger spectroscopy, VSM, and torque magnetometer. It is found that low argon pressure ranging from 1 to 2 mTorr favors the epitaxial growth of Co‐Cr films. The values of Ku, K1 and Hk of the epitaxial films are higher than those of the polycrystal Co‐Cr films.This publication has 5 references indexed in Scilit:
- Film structure and magnetic properties for Co-Cr sputtered filmsIEEE Transactions on Magnetics, 1984
- Perpendicular anisotropy constants and anisotropy energy of oriented cobalt-chromium alloysIEEE Transactions on Magnetics, 1984
- Perpendicular magnetic anisotropy and microstructure of sputter-deposited Co-Cr filmJournal of Magnetism and Magnetic Materials, 1983
- Characteristics of RF-sputtered CoCr filmsIEEE Transactions on Magnetics, 1982
- Studies of the perpendicular magnetization mode in Co-Cr sputtered filmsIEEE Transactions on Magnetics, 1980