Determination of Organic Contaminants in Residential Indoor Air Using an Adsorption-thermal Desorption Technique
Open Access
- 1 January 1990
- journal article
- research article
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 40 (1) , 62-67
- https://doi.org/10.1080/10473289.1990.10466667
Abstract
This field study evaluated the ability of a multi-sorbent sampling tube/thermal desorptfon technique to identify and to provide quantitative data on volatile organic contaminants in indoor air. Air samples, from 12 Canadian homes, were collected on multilayer sorbent cartridges and analyzed using Adsorption/Thermal Desorption coupled with Gas Chromatography/ Mass Spectrometry. The study included the identification and quantitation of 23 target compounds. Analysis of sorbent tubes fortified with these target compounds indicated that recoveries were >70 percent and the precision was usually better than 15 percent. These organic compounds were found to be stable on the sorbent tubes for at least seven days. With some exceptions, the target compounds were usually detected at 1 to 10 μg/m3 in indoor air samples; other organics identified qualitatively were saturated hydrocarbons, unsaturated hydrocarbons, cyclic hydrocarbons, substituted aromatics, oxygenates, some halogenates and cyclic species such as camphenes/pinenes and carenes.This publication has 4 references indexed in Scilit:
- Assessment of adsorption/solvent extraction with polyurethane foam and adsorption/thermal desorption with Tenax-GC for the collection and analysis of ambient organic vaporsAnalytical Chemistry, 1985
- 2,4-Dinitrophenylhydrazine-coated Florisil sampling cartridges for the determination of formaldehyde in airEnvironmental Science & Technology, 1985
- Sampling of organic compounds in the presence of reactive inorganic gases with Tenax GCAnalytical Chemistry, 1984
- Indoor air pollution due to organic gases and vapours of solvents in building materialsEnvironment International, 1982