AlGaInN-based laser diodes
- 18 April 2000
- proceedings article
- Published by SPIE-Intl Soc Optical Eng
- p. 156-164
- https://doi.org/10.1117/12.382094
Abstract
The longer lifetime is desired for high power AlGaInN based violet lasers. We found that lifetime is strongly dependent on both the initial operating consumption power and the dislocation densities in the laser stripe. Pd/Pt/Au as a metal and AlGaN/GaN superlattice as a p-type cladding layer were incorporated to reduce the operating voltage. The optimization of device parameters as well as the stripe width and the RIE etching device depth led to the lower threshold current of 3.4 kA/cm2. We used the Pendeo epitaxy technique to get lower dislocation density approximately 107 cm-2. The LDs with these technologies showed an output power as high as 35 mW under room temperature CW condition without kink. The lifetime is more than 500 hours under CW operation with a constant power of 20 mW at 25 degree(s)C.Keywords
This publication has 0 references indexed in Scilit: